HONDA TRX 450R MX +1/+4 DOMINATOR II AXLE - Race Hub
Motocross axle with race hub.
Adjustable from +1 to +4 inches from stock length.
Note: See FAQ for race hub vs standard hub details.
|Total Length||38 3/4"|
|Length Shoulder to Shoulder||30 1/8"|
|Surface Finish||Hard Chrome|
|Shipping Weight||19 lbs|
What is included with this axle?
RPM's Honda TRX450R MX axle includes the following items:
(2) 1/2" spacers P/N EA0022
(2) 1" spacers P/N EA0021
(2) Castle Nuts P/N B0031
(2) Hitch Pins P/N B0054
(2) Wheel Hub Shoulders P/N EA0195
(1) Honda 450R Race Sprocket Hub P/N A13-120-RA
What makes the Dominator II axle so much stronger than other axle brands?
What kind of warranty do I get with my Dominator II axle?
All RPM Dominator axles come with a Full Lifetime Warranty against bending or breakage for the original purchaser. Each individual axle comes with a warranty card that can be filled out online, or mailed into RPM direct. This card must be filled out within 10 days of purchase and on file at RPM for any warranty axles to be claimed! Under this Warranty, we will either repair or replace the axle (at our option) for as long as you own your axle. All you will be responsible for is the shipping charges! BEWARE:Other axle manufacturers will replace a broken axle once for free, but then charge nearly $200 PER REPLACEMENT thereafter - not RPM! No doubt about it - we have the best warranty available anywhere in the industry.
What's the differerence between the standard hub and the race hub on the Dominator II axle?
The most common problem with aluminum sprocket hubs are the splines holding up to the horse power delivered to the axle. The standard hub is made from a 6061-T6 aluminum (The same as other manufactures of axles and hubs) and is good for stock motor's and may last 3 to 4 race seasons. The race hub is more robust and is made from a 7075 aircraft grade aluminum with a higher yield strength. It is preferred when using highly modified engines and has a much longer life in any application. It also has a mounting surface for an optional sprocket/chain guard. It comes with new mounting hardware needed for the thicker hub. It is used heavily in the pro racing circuit.
What is a "hard" chromed finish?
Dominator II axles are hard chromed for a longer lasting shine than chrome plating that can often times flake off and leave a copper coloring underneath it over time.
Will the Dominator II axle fit all my stock components?